While configuring your Printer Port, if you are receiving an error message An error occurred during port configuration this operation is not supported, it is likely t hat either the Printer Port in use or the Printer Driver installed is corrupted or outdated.
There are different reasons possible what could this issue. The problem might occur because of a common glitch that might be interfering with the port configuration of the wireless connected device on your Windows 10. You need to configure the port through the classic Control Panel in this case.
Another possible scenario is that your printer is currently stuck in the limbo state- a situation where your operating system is not aware that it is turned on. The possible fix in this case is to hard reset your printer.
In some cases, overprotected third party firewall prevents users from accessing the port configuration menu. If this is the case, you should uninstall the firewall causing the trouble. Check below the different fixes in detailed manner.
Possible fixes for an error occurred during port configuration this operation is not supported
Fix 1: Configure your Port
This method can be said to be a workaround than a fix to resolve the problem. This method works in case if you are dealing with the issue while trying to configure your printer ports. As said, to resolve the issue, you should configure the printer ports from the classic Control Panel Interface. Here are the required steps:
- Press Win+ R, type in control.exe and hit Enter to open Control Panel Interface,
- If received UAC prompt, click YES to grant administrative privileges,
- Once in Control Panel Interface, use the search function on the top and search for Device & printers and click on the match result,
- Inside this menu, right-click on the printer that you are having issue with and select Printer Properties,
- In the appeared window, select the Ports tab, select your printer from the list of the ports and then click Configure Port….,
- Check now, if you are able to see the next menu now without receiving an error occurred during port configuration this operation is not supported.
Fix 2: Hard Reset Printer
If you are encountering the issue while using your Printer driver, it is likely that the problem occurs because the corrupted or outdated Printer driver. You need to hard reset your printer in this case to resolve the issue. Here is the quick guide:
- Turn ON your Printer and wait till enters the idle mode,
- When the printer fully turned ON, physically disconnect the power code from the rare of the printer,
- Unplug the power code from the wall outlet now and wait,
- After a minute elapsed, plug the power code back to the wall outlet and re-connect the power code to the rear of the your printer port,
- Turn on your printer,
- When it enters idle mode, repeat the operation that was previously showing an error occurred during port configuration this operation is not supported and see if the problem is now resolved.
Fix 3: Disable third party firewall interface
As per many users that encountered the issue, an overprotective firewall can also be the reason why you have to deal with this issue. Certain AV tools do not trust an external device so that they prevent it from being connected to the system. Those receiving the trouble have managed to resolve it just by reinstalling the third party firewall component.
If you are using any third party firewall and suspect that it is the reason why you receive an error occurred during port configuration this operation is not supported, follow the below steps to uninstall it completely to resolve the problem:
- Press Win+ R, type in appwiz.cpl and hit Enter,
- In the presented list of the programs installed on your computer, locate the third-party security program you want to uninstall,
- Right-click on it and click on Uninstall,
- Go through the un-installation process to uninstall the program.
Conclusion
That’s all! We are now rounding off our post on how to fix an error occurred during port configuration this operation is not supported. If the problem persists on your case, you should employ PC Repair Tool and let this automatic tool to find and delete the persistence issue from your system.
