PXE Booting is a booting of a system over a network. IPv4 is an IPv4 based network. This means that the start pxe over ipv4 boot up error is an error that occurs on system during boot time when the system is trying to boot from PXE over the network.
In this article we are going to discuss the possible fixes that you should try to get the fix for start pxe over ipv4 boot up error.
More about start pxe over ipv4 error windows 10
PXE or Preboot Execution Environment is an industry standard client server interface that allows network computers to start an OS system using the network. The DHCP or Dynamic Host Configuration Protocol and TFTP or Trivial File Transfer Protocol, both are used to carry out the booting process through PXE network boot.
Usually, the PXE installer is enabled within system however one can disable it from the BIOS. Sometimes, when people boot their system, they receive the following message:
Checking Media Presence……
Media Present……
Start PXE over IPv4……
Usually, the error occurs due to the absence of other booting device such as hard drives. Below are the different troubleshooting methods that you should try to get the error resolved:
Fixes for start pxe over ipv4 boot up error
Fix 1: Disable Secure Boot
According to the users receiving this issue, disabling secure boot helps in resolving the problem. Here are the steps:
- Restart your device and enter some specific keys such as F2, Del and ESC to open BIOS settings,
- Go to the Security tab and select Secure Boot Configuration and hit Enter,
- Now, use the right-arrow key and set the Secure Boot disabled,
- Go to the Boot menu or UEFI Boot menu now and change the boot mode to Legacy BIOS,
- Finally, press F10 to save the changes and exit the BIOS settings menu.
Restart your device normally and you will be seeing a message that Boot Order has been changed and you are asked to enter the displayed number. If no such message is received, just continue with the normal booting process. However, when you receive that message, perform the below steps:
- Type the displayed number and hit Enter,
- Turn off the device from the power button,
- Next, enter the BIOS again,
- Go to the Boot tab,
- Select Boot from Hard Drive,
- Finally, restart your computer and check if the problem is fixed.
Fix 2: Change the BIOS Boot Order
If start pxe over ipv4 boot up error continues, check if the boot order lists the LAN on the top list. If yes, you should set the disk as the first boot option. Here are the steps:
- Enter the BIOS settings,
- Go to the Boot tab.
- Now, use the up-down arrow keys and make a selection, from which you want your PC to boot from.
Fix 3: Disable the Wake-On-LAN in BIOS
If the above option does not work, you should disable the Wake-On-LAN in BIOS. Here are the steps:
- Restart your device and enter the BIOS settings,
- Locate Power or Advanced settings and find the Wake-On-LAN option,
- Select Disabled using the up-down arrow keys,
- Press F10 to save the changes and restart the computer normally.
Fix 4: Update BIOS
If there is something wrong with your computer’s BIOS, it is something hard to solve start pxe over ipv4 boot up error that results out it by doing anything else than the BIOS update. Updating BIOS is an advanced process and the steps defer from manufacturer to manufacturer.
Conclusion
That’s all! We have provided all possible fixes for start pxe over ipv4 boot up error. Hopefully, these above mentioned methods help you in getting the fix. if none of the methods work, we recommend you use PC Repair Tool. Here is its direct download link.
This tool will scan your system to replace the corrupted and missing files. This works in most of the cases, where the issue is a result of system corruption. The tool is also known for optimizing the system for maximum performance.
