What is ‘A Disk Read error occurred’ in Windows 10?
In this article, we are going to discuss on How to fix A Disk Read error occurred Windows 10. You will be guided with easy steps/methods to resolve the issue. Let’s starts the discussion.
‘A Disk Read error occurred, Press CTRL + ALT+ DEL to restart’ error: It is common Windows Problem usually occurred when you start/restart your Windows OS based computer. This error is System Boot error that prevents your Windows computer from starting up. This issue indicates there is some issue with hard disk or the hard disk error occurred that’s why you are unable to boot your Windows computer.
The possible reasons behind the issue can be the corruption in hard disk drive, corruption in system files or registry, malware or viruses infections in computer, abrupt or force system shutdown, issue with RAM or memory, bad hard disk sector, damaged boot EFI partition and other hardware relating issues. If you faced system shutdown issue several times before, due to power failure or due to some other reasons, then there is chance to face ‘A Disk Read error occurred’ error in your computer.
Before troubleshooting the issue, you should follow error screen instructions means press ‘CTRL + ALT + DEL’ keys on keyboard to restart your computer. Sometimes, this type of issue is occurred due to improper shutdown of your computer. You can fix temporary issue just by restarting your computer, and check if it works for you. If not, you can follow our instructions to fix the issue. The possible way to fix the issue is to perform RAM or memory reseat operation, fix bad hard disk sector, and corruption in system files or registry, or in system image. Let’s go for the solution.
How to fix A Disk Read error occurred Windows 10?
Method 1: Shutdown your computer properly and let it cool down
This issue can be occurred due to overheating your CPU/GPU/disk. You can fix the issue by shutting down your Windows computer properly and let the System cool down. After few minutes or hours, turn ON your computer again and check if the issue is resolved.
Method 2: Reset BIOS
Check if you are able to access to BIOS setting in your Windows computer. You can access BIOS by pressing ‘F2’ or BIOS supported key on keyboard when Windows start/restart process initiate. Once you are inside BIOS settings, you can perform BIOS settings reset to default in order to fix the issue. You should follow your PC/laptop’s manufacturer official instructions to perform BIOS setting reset in your computer and once finished, check if the issue is resolved.
Method 3: Check hard disk drive/SSD cables
This issue can be occurred if there is issue with hard disk drive/SSD cables connections. To check this, you need to open your PC/laptop CPU case and remove hard disk/SSD cable from its cabinet, check if SATA, ATA cables and hard disk/SSD card is working fine. Now, reconnect your hard disk/SSD cable to your computer and check if the issue is resolved.
Method 4: Reseat your RAM
This issue can be occurred due to issue with your PC/laptop’s RAM. You can perform reseat RAM in order to fix. To do so, you need to open your device’s case and remove RAM from RAM slot, check if RAM hardware is working fine, and then connect RAM to RAM slot properly and then turn ON your computer, and check if it works for you.
Method 5: Repair damaged boot sector or boot sector files using Windows Installation Media
You can perform Boot sector repair in your Windows computer using Windows Installation Media in order to fix.
Step 1: Insert Windows 10 Installation Media bootable DVD/USB into your computer and boot your computer via Installation Media
Step 2: Now, press ‘SHIFT + F10’ keys on keyboard Command Prompt, type the following commands one-by-one and hit ‘Enter’ key after each to execute
bootrec /fixboot
bootrec /fixmbr
exit
Step 3: Once executed, turn OFF your computer and disconnect Windows Installer Media and then turn it ON, and check if the issue is resolved.
Method 6: Use third-party professional data recovery software to recover your data
If the issue is still persist, then you should at first try to recover your data stored in damaged hard disk drive. To do so, you need to disconnect the drive from PC/laptop and use ‘SATA to USB converter’ cable or enclosure to connect your hard drive to working Windows PC. Now, open ‘Disk Management’ tool and assigned a drive letter to connected drive if not assigned already, and then run a data recovery software in your computer to restore your all data. You can get a powerful data recovery software for Windows PC/laptop from internet and use for data recovery in case of hard drive failure.
Fix Windows PC issues with ‘PC Repair Tool’:
‘PC Repair Tool’ is easy & quick way to find and fix BSOD errors, DLL errors, EXE errors, problems with programs/applications, malware or viruses issues, system files or registry issues and other system issues with just few clicks.
Conclusion
I am sure this article helped you on How to fix A Disk Read error occurred Windows 10 with several easy steps/methods. You can read & follow our instructions to do so. That’s all. For any suggestions or queries, please write on comment box below.
