Windows Operating System contains an array of files. These files contain essential information which is used by your OS while performing normal operations. For instance, Ntkrnlmp.exe is a system file which ensures your Windows is functioning properly. Likewise, Boot Configuration Data (BCD) files contain information that is used to describe boot applications and boot application settings. It can be used for a number of purposes such as for creating new stores, modifying existing stores and adding boot menu options.
Under normal circumstances, you can boot your PC without any troubles. But sometimes when the users start their PC they see an error code that says: Your PC needs to be repaired.’
You may also encounter a black screen error and receive message stating: ‘An unexpected error has occurred‘ and ‘A required device isn’t connected or can’t be accessed.‘
Its pertinent to mention these errors can be classifies as booting errors. Such kind of error occurs when the system can’t find the accurate Boot Configuration Data. Error Code 0xc0000225 may also occur if your PC shuts down during a major update. The worst part about this error is your system gets stuck at a booting loop or lead to a complete crash.
As we have earlier mentioned the error simply implies that your PC is unable to find the correct system files required for booting. So it clearly means that either the BCD files are corrupted or missing. But in many cases, it happens when these files are intact but due to other factors your PC fails to use these files. These factors may include the following:
#. Incorrect/Missing active partition from system’s drive
#. Corrupt or faulty hard drive
#. Corrupted or faulty drivers and software
#. Faulty Hardware
#. Presence of malicious program on your PC
Once you are aware with all the possible causes, you can use the following solutions to get rid of the error.
Solutions to fix BCD Error Code 0xc0000225
Method 1: Perform Startup Repair
Startup Repair is an in-built tool. This tool can be used for checking internal errors in the Windows. To get rid of this error, use the following:
Step 1: Once you boot into the System with the USB installation media, wait until you see the Windows logo screen
Step 2: Now confirm the language and click Next > Repair your computer
Step 3: Then select Advanced Options on the Automatic Repair environment
Step 4: Then go to Troubleshoot >Advanced Options
Step 5: On the Advanced Options screen, select Startup Repair
Step 6: Now type your Account Password and click Continue
Step 7: Finally follow the on-screen instructions to finish the process and once done, reboot your PC
Method 2: Perform SFC Scan
Windows provides so many in-built tools; these tools are capable for fixing the Windows issues. One such tool is SFC utility. This in-built tool will repair all your system files. To get started with the scan process, use the following:
Step 1: First of all enter the Automatic Repair Environment and select Troubleshoot > Advanced options > Command Prompt
Step 2: Now in the prompted Command window, type SFC/Scannow and press Enter key
Step 3: The process will take some time > let the process end and one it’s done, close the command prompt > reboot your PC
Method 3: Rebuild the BCD
Once of the major culprits for getting stuck with the Error Code 0xc0000225 is missing BCD. In such case, you can rebuild it to resolve the error.
Here’s how:
Step 1: Firstly Boot your System from the USB installation media and follow Troubleshoot > Advanced options > Command Prompt.
Step 2: In the Command Prompt window, type the following commands and press Enter key:
bootrec /scans
bootrec /fixmbr
bootrec /fixboot
bootrec /rebuildbcd
Keep in mind that this process will consume time so gold your patience. Once it’s done, reboot your PC.
Method 4: Perform CHKDSK Scan
Faulty hard drive is likely to trigger the above mention error, so ensure to run CHKDSK Tool. It will check your hard disk. To do so follow the below mention steps:
Step 1: Enter Automatic Repair Environment then follow Troubleshoot >Advanced Options > Command Prompt
Step 2: In the Command Prompt, type in chkdsk f: /f and press Enter key
Step 3: This process will take some time to finish > once done close the command prompt
Method 5: Set the Active Partition
Widows OS allows you to change the drive partition and choose from which one to boot. And if the current active partition gets corrupted, damaged or gets infected, you can change it. To do so use the following:
Step 1: Open the Command Prompt as mentioned above,> then type disk part and press Enter > then type list disk and press Enter key. You will see the list of disks available in your system)
Step 2: Then type Select X (replace x with the number of your internal disk)> Press Enter
Step 3: Type the command list partition and press Enter key > After this all the available partitions on the drive will display on the screen
Step 4: Then type select partition x ( type the number of the partition number) and press Enter
Step 5: Type active and press Enter > Once done you may close the Command Prompt window
Step 6: Finally Restart your system and see if the issue resolved or not
Method 6: Use System Restore Feature
Windows Restore feature brings back your PC to the point when you were not facing the error. This process brings all the device manager related settings, including device drivers, system programs, files, apps etc. to the default settings. To proceed with this method, follow the below mention guidelines:
Step 1: First of all you need to enter the Automatic Repair environment using the steps perform Startup Repair
Step 2: Then follow Advanced Options and select System Restore
Step 3: On the next prompt, proceed with selecting a restore point and then clicking Scan for affected programs
Step 4: Lastly, click Next > Finish > Once done, reboot your PC
Step 5: Once done then see if the issue resolved or not
Method 6: Check for faulty Hardware
In this method we suggest you to check your hard disk for physical issues. Check to ensure the drive is not damaged, and reset it if possible. Depending on your computer manufacturer, you may also use the in-built tools to check your hardware functionality.
Method 7: Reinstall Windows
If none of the above mentioned method works for you we suggest you to reinstall Windows. But remember that this process will wipe all your data. Your drive will be formatted in this process. So ensure to create a backup before proceeding with the method.
Go for an Automatic Solution
These were some of the methods to resolve BCD Error Code 0xc0000225. But if you don’t want to struggle with manual methods in such case, we suggest you an automatic PC Repair Tool. This professional PC repair Tool is capable for resolving the errors originated due to system corruption. So try this tool once if you are looking for a hassle frees solution.
⇑Get PC Repair Tool from Here⇓
Bottom Line!
Here we conclude the article. We gave tried to mention all the possible methods to tackle the Error Code 0xc0000225. Keep in mind that the root cause for facing this error is corrupted system files. So ensure to keep your system files intact. Along with that, regularly update your drivers and check whether your hardware is fully functional or not. Thanks for Reading.
